Opvimus DA-4PM/0, Руководство по эксплуатации

Страница: 4 / 16

DA-4PM/0 version 1.0.E
4
Mainframe for
4 modular amplifiers
DA-4PM/0
1. INTRODUCTION
Power amplifier mainframe. It has four slots that allow inserting amplifiers of the MP-WD1 series (models MP-120WD1, MP-
150WD1, MP-250WD1, MP-300WD1 and MP-460WD1), or amplifiers of the MP-WDC series (models MP-120WDC, MP-150WDC,
MP-250WDC, MP-300WDC and MP-460WDC (amplifiers not included).
Main characteristics:
• 4 Slots for modular Class D amplifiers. High efficiency (90%).
•
100-240 VAC Main input power.
• Secondary 24VDC input power supply independent for each power amplifier module (ONLY MP-WDC modular amplifiers
series).
•
DC voltage output for amplifier surveillance.
• Amplifiers standby mode control.
•
1u Rack height.
2. FRONT VIEW
1. Slot 1 for amplifier module (amplifier not included).
2. Slot 2 for amplifier module (amplifier not included).
3. Slot 3 for amplifier module (amplifier not included).
4. Slot 4 for amplifier module (amplifier not included).
5. Amplifier module POWER LED indication (see section 8).
6. Amplifier module STANDBY LED indication (see section 8).
7. Amplifier module PROTECT LED indication (see section 8).
8. Amplifier module CLIP LED indication (see section 8).
9. Amplifier module SIGNAL LED indication (see section 8).
Figure 1