Optoma ZH606-B Скачать руководство пользователя

Страница: 41 / 67

English 41

USING THE PROJECTOR

Setup menu

Setup projection menu

Projection

Select the preferred projection between front, rear, ceiling-top, and rear-top.

Setup screen type menu

Screen Type (for WUXGA model only)

Choose the screen type from 16:9 and 16:10.

Setup power settings menu

Direct Power On

Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied,

without pressing the “Power” key on the projector keypad or on the remote control.

Signal Power On

Choose “On” to activate Signal Power mode. The projector will automatically power on when a signal is detected,

without pressing the “Power” key on the projector Keypad or on the remote control.

Auto Power Off (min.)

Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the

projector. The projector will automatically power off when the countdown has finished (in minutes).

Sleep Timer (min.)

Configure the sleep timer.

Sleep Timer (min.):

Sets the countdown timer interval. The countdown timer will start, with or without

a signal being sent to the projector. The projector will automatically power off when the countdown has

finished (in minutes).

Note:

The Sleep Timer is reset every time when the projector is powered off.

Always On:

Check to set the sleep timer always on.

Power Mode (Standby)

Set the power mode setting.

Active:

Choose “Active” to return to normal standby.

Eco:

Choose “Eco.” to save power dissipation further < 0.5W.

USB Power (Standby)

Enable or disable the USB power function when the projector is in standby mode.

Note:

The USB is not able to supply power with S-Video or MHL sources.

Содержание ZH606-B




































































Результаты поиска

Содержание ZH606-B

Отзывы:

Похожие инструкции для ZH606-B

Бренды по названию

Популярные бренды

Optoma ZH606-B, Руководство пользователя

Результаты поиска

Содержание ZH606-B

Отзывы:

Похожие инструкции для ZH606-B

Бренды по названию

Популярные бренды