Optoma X605 страница 16 Скачать руководство пользователя

Страница: 16 / 101

English

Caution

• Do not shake or place excessive pressure on the projector or the

lens components as the projector and lens components contain

precision parts.

• Before removing or installing the lens, be sure to turn off the

projector, wait until the cooling fans stop, and turn off the main

power switch.

• Do not touch the lens surface when removing or installing the lens.
• Keep fingerprints, dust or oil off the lens surface. Do not scratch

the lens surface.

• Work on a level surface with a soft cloth under it to avoid scratching.
• If you remove and store the lens, attach the lens cap to the

projector to keep off dust and dirt.

Removing the Existing Lens From the Projector

1. Push down and

release the top cover

to open.

2. Push the LENSE

RELEASE button to

the unlock position.

3. Grasp the lens.

4. Rotate the lens

counterclockwise.

The existing lens will

be disengaged.

Installing or Removing the Optional Lens

Removal of

the plastic

body cap

before

inserting a

lens for the

first time.

Installation

Содержание X605






































































































Результаты поиска

Содержание X605

Отзывы:

Похожие инструкции для X605

Бренды по названию

Популярные бренды

Optoma X605, Руководство пользователя

Результаты поиска

Содержание X605

Отзывы:

Похожие инструкции для X605

Бренды по названию

Популярные бренды