Optoma W9PD7JF01VZ1, Руководство пользователя

Страница: 36 / 77

36 English
USING THE PROJECTOR
Signal
Adjust the signal options.
• Automatic : Configure automatically the signal (the frequency and phase items are grayed out). If automatic
is disabled, the frequency and phase items will appear for tuning and saving the settings.
•
Frequency
: Change the display data frequency to match the frequency of your computer’s graphic card.
Use this function only if the image appears to flicker vertically.
• Phase : Synchronize the signal timing of the display with the graphic card. If the image appears to be un -
stable or flickers, use this function to correct it.
•
H. Position
: Adjust the horizontal positioning of the image.
• V. Position : Adjust the vertical positioning of the image.
Note:
This menu is only available if the input source is RGB/Component.
Brightness Mode
Adjust the brightness mode settings.
•
DynamicBlack
: Use to automatically adjust the picture brightness in order to give optimum contrast perfor -
mance.
• Eco. : Choose “Eco.” to dim the projector light source which will lower power consumption and extend the
light source life.
•
Constant Power
: Choose the power percentage for brightness mode.
• Constant Luminance : Constant Luminance varies the strength of LD luminance such that the brightness
maintains consistent with time.
Reset
Return the factory default settings for color settings.
Display enhanced gaming menu
Enhanced Gaming
Use this function to enable/disable the system to reduce response times (input latency) during gaming.
• On : Reduce the latency of image that can display image simutanneously.
• Off : Without reduce the latency.
Note: When the Enhanced Gaming function is turned on, the Keystone, 4-corner, Aspect Ratio, Zoom, 3D, and
Screen Type will be unavailable.