Optoma H117ST Скачать руководство пользователя

Страница: 43 / 74

English 43

USING THE PROJECTOR

Setup menu

Setup projection menu

Projection

Select the preferred projection between front, rear, ceiling-top, and rear-top.

Setup screen type menu

Screen Type (for WXGA model only)

Choose the screen type from 16:9 and 16:10.

Setup lamp settings menu

Lamp Reminder

Choose this function to show or to hide the warning message when the changing lamp message is displayed. The

message will appear 30 hours before suggested replacement of lamp.

Lamp Reset

Resets the lamp hour counter after replacing the lamp.

Setup filter settings menu

Optional Filter Installed

Set the warning message setting.

Yese:

Display warning message after 500 hours of use.

Notee:

“Filter Usage Hours / Filter Reminder / Filter Reset” will only appear when “Optional Filter Installed” is “Yes”.

Noe:

Turn off warning message.

Filter Usage Hours

Display the filter time.

Filter Reminder

Choose this function to show or hide the warning message when the changing filter message is displayed. The

available options include Off, 300hr, 500hr, 800hr, and 1000hr.

Filter Reset

Reset the dust filter counter after replacing or cleaning the dust filter.

Setup power settings menu

Direct Power On

Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied,

without pressing the “Power” key on the projector keypad or on the remote control.

Signal Power On

Choose “On” to activate Signal Power mode. The projector will automatically power on when a signal is detected,

without pressing the “Power” key on the projector Keypad or on the remote control.

Notee:

If the “Signal Power On” option is turned “On”, the power consumption of the projector in standby

mode will be over 3W.

Due to the ErP directive, this feature is not available on models found in EMEA.

Содержание H117ST











































































Результаты поиска

Содержание H117ST

Отзывы:

Похожие инструкции для H117ST

Бренды по названию

Популярные бренды

Optoma H117ST, Руководство пользователя

Результаты поиска

Содержание H117ST

Отзывы:

Похожие инструкции для H117ST

Бренды по названию

Популярные бренды