Optoma DS322e, Руководство пользователя

Страница: 57 / 72

English 57
ADDITIONAL INFORMATION
Projector dimensions and ceiling mount installation
1. To prevent damage to your projector, please use the Optoma ceiling mount.
2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to
the projector meet the following specifications:
‡
Screw type: M4*3
‡ Minimum screw length: 10mm
Unit: mm
Lens
Notee:
Please note that damage resulting from incorrect installation will void the warranty.
Warning:
‡ If you buy a ceiling mount from another company, please be sure to use the correct screw size.
Screw size will vary depending on the thickness of the mounting plate.
‡ Be sure to keep at least 10 cm gap between the ceiling and the bottom of the projector.
‡ Avoid installing the projector near a heat source.