Optoma DLP ZU1700, Руководство пользователя

Страница: 103 / 120

English 103
ADDITIONAL INFORMATION
Specifications
Optical Description
Resolution WUXGA (1920 x 1200)
Lens Power Zoom/Focus and full lens shift
Image size (diagonal) 50”~500”
Projection distance
Please refer to “Throw Distance” spec. in “Image size and projection distance” on
page 95.
Electrical Description
Inputs
2 x HDMI In (version 2.0) (with locking screw)
1 x DisplayPort 1.2a
1 x DVI-D
1 x VGA In
1 x HDBaseT
1 x 3G-SDI In
1 x 3D SYNC In
Outputs
1 x HDMI Out (version 2.0) (with locking screw)
1 x 3G-SDI Out
1 x 3D SYNC Out
Control port
2 x RS232 (D-sub 9 pin) (PC Control)
2 x Wired in/out (3.5mm phone jack) (Remote In/out)
1 x 12V Trigger (3.5mm phone jack / Black)
1 x USB type A (5V/0.5A)
1 x RJ-45 (LAN)
2 x IR Receiver (Front / Top)
Power requirement
100-240V~, 50/60Hz, 16A
200-240V~, 50/60Hz, 8A
Mechanical Description
Installation orientation 360° rotation, no restrictions
Dimensions
650 (W) x 682 (D) x 300.9 (H) mm (w/o lens, with feet)
650 (W) x 682 (D) x 251 (H) mm (w/o lens, w/o feet)
Environmental conditions
Operating: 0~50°C(32~122°F); 10~85%RH, non-condensing
Storage: -10~60°C(14~140°F); 5~90%RH, non-condensing
Note:
If temperature is >40°C(104°F) or altitude >5000 ft, then the system will dim
output brightness to ensure the normal operation of the projector.
Note:
All specifications are subject to change without notice.