OPTO-EDU A63.7080 страница 64 Скачать руководство пользователя

Страница: 64 / 65

9.1.1 Manufacturer's guarantee commitment

All kinds of SEM products and related ancillary products produced by our company,

we promise to provide users with on-site installation, relocation and various system

maintenance, repair, system upgrade, system expansion, etc. in a timely and fast

after-sales service. service

9.1.2 After-salesservice

All types of SEM products and related ancillary products produced by our company

are responsible for after-sales service by OPTO-EDU technicians.

Warning: In order to ensure the safety of the instrument, it is forbidden to install any

other software in the computer; before copying files from the computer with a floppy

disk, USB disk or removable hard disk, make sure it is not infected! Therefore, the

instrument damage

9.1.2.1 Scanning electron microscope installation procedure

After the instrument arrives, the user will be notified to arrive in time for installation.

The main contents of the installation work are

：

The installer will unpack and inspect

the goods together with the user according to the Packing List. After the installation

and commissioning of the installer is completed, the user will check the instrument

item by item according to the requirements of the “Installation Acceptance Report”.

After the acceptance is passed, the user signs and seals the report and submits it to

the company for filing and the user to reserve the bottom

。

After the instrument is

accepted by the installer, the user will be retrained for three 68 days according to the

requirements of the User Training Report, so that the user can master the basic

operation of the sample and the simple maintenance of the instrument. After the

training, the user signs the report and handed it over to the OPTO-EDU installer to

bring it back to the company for filing.

9.1.2.2 Warranty period

Free consultation, free on-site repair, free replacement of parts (except for damage

Содержание A63.7080


































































Результаты поиска

Содержание A63.7080

Отзывы:

Похожие инструкции для A63.7080

Бренды по названию

Популярные бренды

OPTO-EDU A63.7080, Инструкция по эксплуатации

Результаты поиска

Содержание A63.7080

Отзывы:

Похожие инструкции для A63.7080

Бренды по названию

Популярные бренды