www.optoedu.com
3/18
Before using A13.0905
Invert metallurgical microscope is used to discern and analyze organizational structure from
kinds of metal. It is very important in the work of quality research for foundry, smelt, heat
treatment and inspection for raw material and analysis for metallurgical structure of material after
processing. It is also the important tool of research work for metal physics, which is wildly used
in enterprise, university and R&D.
1. Attention:
1.1 As the microscope is precision
instruments, it should be taken carefully
and avoid impact during transportation
.
1.2 Do not expose the microscope in the
sun directly, either not in the high
temperature, damp, dusty or acute
shake place. Make sure the worktable is
horizontal. Following environment is
required: Indoor temperature: 5
℃ ～
40
℃
, Max relative humidity:80%.
1.3 To move the microscope, please hold
groove
①
behind and tube position
②
and lay it carefully. (Fig. 1)
★
It will be damaged by holding the stage, focusing knobs, tube or illuminator.
1.4 The lamp will be very hot during working, please make sure there is enough space around for
dissipating
.
1.5 Please connect the microscope with ground to avoid lighting strike.
1.6 Please make sure the power switch is “0”(Off)(See the left Fig) and the bulb cool down
before replace the bulb or fuse.
★
Bulb: 3W LED bulb
12V/30W halogen bulb (Philips 5761)
1.7 It adopt wildly voltage 90~240V, and do not need any transformer. Please make sure the
power supply before using.
1.8 Please use special wires supplier by our company.
Fig.1
