Part #: 65-REM01-001-00, FCC ID: 2AOS5-ILIGHT
1. To turn your OPEN sign ON, press the “ON” button.
2. To turn you OPEN sign OFF, press the “OFF” button.
3. To replace the battery, remove the key chain ring and two screws on the back side of the
remote. Remove the old battery and insert the new battery in the same position and
orientation to assure proper polarity. Use only 12V, size A23, replacement batteries.
4. If you have questions regarding your remote control or battery replacement, please contact
Optiva Signs at (312) 568-5760.
Back side of remote control
TRIPLE
YOUR WARRANTY
from
1
year to 3 years
when you register your sign online at
www.SpellBrite.com/Optiva-V
Enter production lot X3V1712 in online form
Operating Instructions – Optiva
®
Ultra-Bright LED OPEN Sign
Thank you for purchasing your new Optiva
®
ultra-bright LED OPEN sign. Make sure to read all instructions and
warnings prior to installing your new sign. Please save your purchase receipt as it is required for warranty service.
• Risk of electrical shock, fire or injury to persons.
• This product is intended for INDOOR USE ONLY and DRY
LOCATIONS only. Do not use in damp or wet locations. Do not
install your product in an area that will exceed 120°F (48.9°C).
• Disconnect power before handling or cleaning.
• Use only included power adapter. Do not use any other power
adapters.
• Only plug into a properly grounded outlet that meets all local
and national electric codes.
• Do not use extension cords or adapters.
• Operate at voltage equal to that on the product label.
• Do not use solvents or chemicals to clean your sign. Do not
submerge your sign in any liquid.
• Do not use this sign with an external dimmer.
• Do not attempt to disassemble or service sign.
• Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
• This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions : (1) this device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
• NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
C A U T I O N
I N S T A L L A T I O N
1. Select an indoor location to hang your sign.
2. Remove the hanging chains and “S” hooks from the parts bag and attach to hanger
tabs on the top of the sign.
3. Select a surface that will fully support the sign and mount hooks securely to surface
using appropriate hanging hardware.
4. If hanging in window, allow minimum 2” space between the front of the sign and the
window. If mounting on wall, allow 1” space between the wall and sign.
5. Use only included power adapter and insert barrel plug into 12 VDC 1.0A power input
at back of sign.
6. Press ON/OFF switch to ON (I) position. Sign will illuminate.
7. To clean sign, unplug power and gently wipe surfaces with a soft, dry cloth.
U L T R A B R I G H T L E D O P E N S I G N
I N S T R U C T I O N S & W A R R A N T Y
Hanger
Tab
U L T R A B R I G H T L E D O P E N S I G N
I N S T R U C T I O N S & W A R R A N T Y
Hanger
Tab
R E M O T E C O N T R O L
