External
Trigger
(optional)
Acquisition
System
(optional)
OptiHub
(Master Hub)
OptiHub
OptiHub
6 × Cameras
6 × Cameras
6 × Cameras
Hi Speed
USB 5m
Hi Speed
USB 5m
Hi Speed
USB 5m
OptiSync Mode
(No RCA Cables
Required)
USB Uplink
*
Hub to Hub
Sync
OptiSync Mode. No RCA Sync Cables
Required
(Wired Sync is Optionally Available)
All Optional Features Shown
- External Sync IN/OUT
- Active USB Extension
OptiSync Not Valid with Mixed
Camera or Hub Configurations. Wired
Sync Only.
Flex 13 cameras require an OptiHub
v2 and may not be mixed with
V100:R2 cameras in the same system.
•
•
•
•
Up to 2 Active
USB Extensions
5m
(optional)
External Sync
USB Uplink
Hi Speed USB
Hub to Hub Sync
1
2
3
4
5
6
7
8
9
10
11
18
17
13
14
15
16
12
OptiHub Setup with 18 V100:R2 or Flex 13 Cameras
OPTISYNC
SCREEN OPTIMIZED
Copryright © 2012 NaturalPoint Inc. Patents Pending.
www.optitrack.com
*Note:
Hub USB Uplinks should
be divided among both
Enhanced Host Controller
Interfaces (EHCI) in your PC. Its
best to use the USB ports on the
back of your system. There
should be two separate groups of
USB ports, which could identify
each EHCI. Plug two hubs into
one EHCI and one hub into the
other. See diagram to the right.
PC Back Panel
