User Manual – ePX 200
OptiPro Systems, LLC.
Page 13 of 60
Last Modified: 7/30/2014
5.2.2
Jog Pendant
Figure 5-5: Hand Wheel
Button
Description
Axis Selection
Selects which axis on the machine to move.
Feed Rate Control
Controls the feed rate of the selected axis.
Jog Wheel
The JOG WHEEL can be used to move all axes (X, Y, Z, 4, or 5). When Axis
Selection is on 4, the B-axis can be rotated. When Axis Selection is on 5,
the work spindle (S2) can be rotated.
Emergency Stop
The
EMERGENCY STOP
(
E-STOP
) button should be used to stop the
machine if there is any danger to the operator, machine, or process. See
Section 6.3 for more information.
+ / - Movement
Press to move the selected axis in the + or – direction.
See Fagor manual for additional information
Jog Wheel
Axis Selection
Feed Rate
Control
Emergency
Stop
+/- Movement
