Q:
I cannot remember my login to the device's admin pages, What to
do ?
A:
If you have forgotten your login, you will have to re
resetting the device to its default
procedure described in "How to reset the XYFI to its default factory
settings ?". After the reset, create again your username and
password. This time, put your login in a safe place.
Q:
How to reset the XYFI to its default factory settings ?
A:
1. Make sure that you have a powered USB source (battery, car
adaptor, power adaptor or a USB power source from a PC).
2. Insert the XYFI into the USB power source while pushing on the LED
button.
3. Keep pushing on the LED button for around 40 seconds until the
LED stops flashing and comes to a steady state.
4. Refer to your Quick Start Guide to connect to your XYFI using the
default settings printed on the label under one of the plastic cover
and re-create your username and password using the browser.
XYFI – FAQ
I cannot remember my login to the device's admin pages, What to
If you have forgotten your login, you will have to re-create it by
resetting the device to its default factory setting. Please follow the
procedure described in "How to reset the XYFI to its default factory
settings ?". After the reset, create again your username and
password. This time, put your login in a safe place.
How to reset the XYFI to its default factory settings ?
1. Make sure that you have a powered USB source (battery, car
adaptor, power adaptor or a USB power source from a PC).
2. Insert the XYFI into the USB power source while pushing on the LED
3. Keep pushing on the LED button for around 40 seconds until the
LED stops flashing and comes to a steady state.
4. Refer to your Quick Start Guide to connect to your XYFI using the
default settings printed on the label under one of the plastic cover
create your username and password using the browser.
version 1.1
15
th
Nov, 2012
I cannot remember my login to the device's admin pages, What to
create it by
factory setting. Please follow the
procedure described in "How to reset the XYFI to its default factory
settings ?". After the reset, create again your username and
1. Make sure that you have a powered USB source (battery, car
adaptor, power adaptor or a USB power source from a PC).
2. Insert the XYFI into the USB power source while pushing on the LED
3. Keep pushing on the LED button for around 40 seconds until the
4. Refer to your Quick Start Guide to connect to your XYFI using the
default settings printed on the label under one of the plastic covers
create your username and password using the browser.
