OPERATING INSTRUCTIONS:
SETTING UP
Carefully remove your fan from the box (please save the carton for off-season storage).
Make sure the unit is in the OFF position before plugging the unit into the outlet.
ASSEMBLY INSTRUCTIONS
Carefully unpack the contents of this carton.
1) Take all components and parts out from the cartons.
2) Dismantle the screw and plain from the bottom of the pole, then the pole is aligned with the
center hole of round base and fix the pole tightly with screw and plain washer which
was dismantled first.
3) Dismantle two screws from the bottom of the switch box, insert the bottom into the inner
pole, and firmly fix the bottom and the pole together with the screws which were dismantled.
4) Assembly is now completed. Please make sure the outlet voltage is same as rate voltage and
the Selector (Speed Control) is in the OFF position. Then plug the power cord into any outlet.
OPERATING
1)
Place fan on a firm level surface.
2)
Plug the power cord into any standard 120V AC, 60HZ outlet. Please make sure the
Selector (Speed Control) is in the OFF position.
A loose fit between the AC outlet
and plug may cause over heating of the plug. Have a qualified electrician to
replace the old outlet if the power cord feels extremely hot.
3)
Tilt and adjust the fan head to the desired angle or airflow.
4)
The SPEED is adjusted by moving the knob to the desired setting.
5)
The OSCILLATION switch is located to the left of the speed control knob. To start
oscillation, push down the oscillation knob. For stationary, push up the oscillation
knob.
FAAN DIRECTION ADJUSTMENT
1)
Do not attempt to make any adjustments to the direction of the grille and fan
assembly until the fan has been turned off and unplugged from the socket.
2)
To adjust the direction of the fan, hold the grille and gently tilt the fan until the
desired position is reached.
3)
Plug the fan back into the socket and turn the fan on.
CLEANING
During Season Care:
Before cleaning, be sure to turn off and unplug the unit.
Keep the fan clean. Carefully wipe the unit with a soft, damp cloth. Please be very
cautious near the motor.
DO NOT immerse the fan in water and never allow water to drip into the Motor
Housing.
Never use gasoline, benzene or thinner. This will damage the surface of the unit.
After cleaning, be sure to completely dry the unit with a cloth or towel.
After Season Care:
Your fan can be stored in the off-season.
Before putting the fan in storage, clean it thoroughly, cover it with a vinyl bag, and
store it in a cool and dry place. We recommend using the original (or appropriately
sized) box.
