Optimum Optimum 3292385, Руководство по эксплуатации, Страница: 7 / 80

Safety
Version 1.0.4 - 2020-10-13 7 Translation of original instruction
SD500AV EN
SD500A
V_G
B
_1.
fm
1.4 Intended use
WARNING!
In the event of improper use, the metal belt saw

will endanger personnel,

will endanger the machine and other material property of the operating company,

the correct function of the machine may be affected.
The machine is designed and manufactured to be used in environments where there is no
potential danger of explosion.
The metal belt saw is designed and manufactured to saw cold metal, cast material and plastics
or other material that are not health hazardous and do not generate dust.
The metal band saw must not be used on wood.
The pieces to be cut must be of a shape that will allow them to be securely attached in the
workholder vice and ensure that the piece does not come loose when it is being sawed.
The metal belt saw must only be installed and operated in a dry and ventilated place.
Operations not in
accordance with
intended use!
If the metal belt saw is used in any way other than described above, modified without authoriza-
tion of Optimum Maschinen Germany GmbH, then the metal belt saw is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accor-
dance with the intended use.
We expressly point out that the guarantee or CE conformity will expire due to any constructive
technical or procedural changes which had not been performed by the company Optimum
Maschinen Germany GmbH.
It is also part of intended use that

observe the limits of the metal belt saw,

obey the operating instructions,

the inspection and maintenance instructions are observed.

Technical specification on page 17
The decisive factor for achieving efficient cutting and the necessary angular tolerance is the
correct choice of parameters such as the saw band, feed, cutting pressure, cutting speed and
cooling agent.
Switching on forbidden!
Area prohibited for persons
with implants!
Read the operating
instructions before
commissioning!
Pull out the mains plug! Wear protective glasses! Wear protective gloves! Wear safety shoes!
Wear a protective suit!
Use ear protection! Protect the environment!
Contact address