Optimum Optimum 3292385, Руководство по эксплуатации, Страница: 42 / 80

Maintenance
Version 1.0.4 - 2020-10-13 42 Translation of original instruction
SD500AV
EN
SD500A
V_G
B
_6.
fm
WARNING!
Before starting the metal band saw you must be sure that

no dangers generated for persons,

the metal band saw is not damaged.
5.2 Inspection and maintenance
The type and level of wear depends to a large extent on the individual usage and operating
conditions. All specified intervals therefore only apply to the intended, average conditions of
use.
Interval / When
Wher
e?
What? How?
every day
Metal band
saw
Visual inspection

Visual inspection of the machine, in particular the
saw band.

Check the cooling lubricant system for contamina-
tion and function. Check the condition (concentra-
tion) of the cooling lubricant.

Check the saw band guide for completeness and
ease of movement.

Check control functions.

Check limit switch.
weekly
Metal band
saw
Visual inspection

Check the function of the chip brush.

Clean coolant tank and check coolant pump filter for
blockage.
weekly
Sa
w ba
nd
g
u
id
e
Saw blade brush

Clean the saw blade brush with a steel brush.
Img.5-1: Saw blade brush
weekly
Coo
lin
g lub
rican
t
tank
Fill level status
control
Check for liquid level, concentration, pH value, bacteria and
fungal decay.

Inspection plan for water-mixed cooling lubricants on page
52
Saw blade brush