Optimum Optimum 3292385, Руководство по эксплуатации, Страница: 30 / 80

Operation
Version 1.0.4 - 2020-10-13 30 Translation of original instruction
SD500AV
EN
SD500A
V_G
B
_4.
fm
4 Operation
4.1 Safety
Use the metal belt saw only under the following conditions:

The metal belt saw is in proper working order.

The metal belt saw is used as prescribed.

The operating instructions are followed.

All safety devices are installed and activated.
Rectify faults or have them rectified immediately. Stop the machine immediately in the event of
any abnormality in operation and make sure it cannot be started-up accidentally or without
authorisation.
Notify the person responsible immediately of any modification.

Safety during operation on page 14
4.2 Control and indicating elements
Fig.4-1: SD500AV
1
2
3
4
6
7
9
5
11
12
10
8
Pos. Designation: Pos. Designation:
1
Pressure gauge saw band tension
6
Machine vice
2
Adjusting tension of saw band
7
Control panel
4.2.1 „Control panel“ on page 31
3
Handle
8
Clamping lever Saw bow
4
Adjustable saw band and coolant hose
guide
9
Material stop
5
Handwheel machine vice
10
Hydraulic cylinder saw bow
11
Hydraulic cylinder Machine vice
12
Saw bow limit position switch