Optimum Optimum 3292385, Руководство по эксплуатации, Страница: 12 / 80

Safety
Version 1.0.4 - 2020-10-13 12 Translation of original instruction
SD500AV
EN
SD500A
V_G
B
_1.
fm
1.9.2 Emergency stop switch
CAUTION!
Only press the emergency-stop button in a genuine emergency. The emergency stop
switch is not suitable for shutting down the machine operationally.
The emergency stop switch switches off the drives of the metal band saw.
INFORMATION
Turn the emergency stop button clockwise after pressing it to switch on the metal band saw
again.
1.9.3 Saw bow
The saw bow of the metal band saw is provided with a protective cover. The
protective cover covers the band guide rollers and the rotating saw band.
The metal belt saw only switches on when the protective cover is being closed.
WARNING!
Danger of injury! The teeth of the saw belt are sharp. Take great care when opening the
protective cover to change the saw blade.
Close and mount all protective covers before restarting the metal belt saw.
1.9.4 Saw band guide
Refit the protective covers after each saw band change.
1.9.5 Prohibition, warning and mandatory signs
INFORMATION
All warning signs must be legible.
1.10 Safety check
Check the metal belt saw at least once per shift. Inform the person responsible immediately of
any damage, defects or changes in the operating function.
Check all safety devices

at the beginning of each shift (with the machine stopped),

once a week (with the machine in operation),

after all maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the metal belt saw

are legible (clean them, if necessary)

and complete (replace them, if necessary).
INFORMATION
Organise the checks according to the following table;