Optimum OPTImill MZ 25, Руководство по эксплуатации

Страница: 66 / 122

Version 1.0.4 - 2020-09-08 66 Translation of original instructions
MZ2S EN
MZ
2S
_G
B_5-
2.f
m
5.4.12 Play adjustment of the guide in the Y axis
By adjusting the V-ledge at the front and/or rear.

Remove the sheet cover to the rear of the spindle bearing block.

Remove protective cover on the front - if present.
Perform measurement on the front:
If possible, use a dial gauge with drag pointer.

Fix dial gauge as shown.

Move the milling head to the left and right.

Read the dial gauge, the total deviation must be less than 0.01mm.
In the event of a larger deviation, push the V-ledge with the adjusting screw slightly.
Perform measurement at the rear:
Position the dial gauge on the rear and proceed using the same method.
Abb.5-10: Adjust guide, Y axis
X
Y
Z
Adjustment screw
Milling head
Machine stand
V-ledge
Dial gauge