Optimum OPTImill MZ 25, Руководство по эксплуатации

Страница: 25 / 122

Version 1.0.4 - 2020-09-08 25 Translation of original instructions
MZ2S EN
MZ
2S
_G
B_3.
fm
3.2 Unpacking the machine
INFORMATION
The milling machine is delivered pre-assembled. It is delivered in a transport box. After the
unpacking and the transportation to the installation site it is necessary to mount and assemble
the individual components of the milling machine.
Install the machine close to its final position before unpacking. If the packaging shows signs of
having possibly been damaged during transport, take the appropriate precautions to prevent
the machine being damaged when unpacking. If damage is discovered, the carrier and/or ship-
per must be notified immediately so the necessary steps can be taken to register a complaint.
Examine the complete machine carefully and check whether all materials, such as shipping
documents, instructions and accessories have been delivered with the machine.
3.2.1 Accessories
- 1 x Oil bottle for oil cups
- 3 x Open-ended spanner (2)
- 1 set Allen key (3)
- 1 x Hand lever for spindle sleeve feed (4)
- 1 x Philips and flat screwdriver (5)
- 1 x ISO 40 - MT3 adapter (6)
- 1 x MT2 morse taper (7)
- 1 x MT1 morse taper (8)
- 1 x drill drift for morse taper (9)
- Adjusting discs and adjusting screws (10)
- Dirt cover: drive
Vertical spindles (11)
- ISO 40 Collet chuck with 7 pcs collet
6, 8,10,12,16,20,25mm (12)
-

Arbors for side milling cutter on page
49
- Frequency converter operating instructi-
ons on CD or printed ( Instructions are in
the electrical cabinet ).
- Test report machine accuracy
- Operating instructions in printed form
3.3 Transport
4
1
6
2
3
5
10
7 8
9
11
12

Weights

Set-up and assembly on page 26
Weight of the milling machine

„ Total weight [kg]“ on page 20
2.5 t