Optimum OPTImill MZ 25, Руководство по эксплуатации

Страница: 19 / 122

Technical specification
Version 1.0.4 - 2020-09-08 19 Translation of original instructions
MZ2S EN
MZ
2S
_G
B_2.
fm
2 Technical specification
The following information represents the dimensions and indications of weight and the manu-
facturer‘s approved machine data. The calculated envisaged life of the machine to EN ISO
13849 and EN ISO 12100 is at least 10 years with a daily operation of 8h at 220 working days
per year when keeping to the ambient conditions, proper use and keeping to the required main-
tenance intervals. Safety-related replacement parts are included in this calculation. Normal
replacement parts such as, for example, bearings, are not part of this calculation.
2.1 Electrical connection
Total connection 3 x 400V ~ 50Hz , 4 kVA
Cross section connection cable according to DIN 5710/
VDE 0100
4 x 2 mm
2
Fusing performed by the operator 11A to 16 A
Operating mode, duty cycle S4 - 40%
2.2 Spindle seat
Spindle seat ISO 40 DIN 2080
Draw bar M16
2.3 Spindle drive
Power at 100% / 40% ED 2.2 / 3.0 KW
Speed 50 - 1890 min
-1
Spindle torque at 1750 rpm 285 Nm
2.4 Milling capacity

Milling capacity of the machine on page 41
2.5 Vertical spindle
Spindle seat ISO 40
Distance between spindle nose - cross table [mm] 75 - 410
Throat max. [mm] 100
Spindle sleeve travel [mm] 120
Vertical rotation range ± 90°
Ø 4
4.
4
5
16.
1
10
max. 22.5
1.6
M1
6
32
93.4
Ø 25.
3
Ø 63