Optimum OPTImill MZ 25, Руководство по эксплуатации

Страница: 15 / 122

Safety
Version 1.0.4 - 2020-09-08 15 Translation of original instructions
MZ2S EN
MZ
2S
_G
B_1.
fm
1.9.5 Prohibition, warning and mandatory signs
INFORMATION
All warning and mandatory signs must be legible. They must be checked regularly.
1.10 Safety check
Check the milling machine at least once per shift. Inform the person responsible immediately of
any damage, defects or changes in the operating function.
Check all safety devices

at the beginning of each shift (when the machine is operated continuously),

once per day (during one-shift operation),

once per week (when operated occasionally),

after all maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the milling machine

are legible (clean them, if necessary)

and complete (replace them, if necessary).
INFORMATION
Organise the checks according to the following table;
General check
Equipment Check OK
Protective covers Firmly bolted and not damaged
Signs, Markings Installed and legible
Sight window Check for mechanical damage (scratches, cracks)

Polycarbonate windows on page 14
Date: Checked by (signature):
Functional check
Equipment Check OK
Emergency-stop
push button After actuating an emergency stop push button the mil-
ling machine must be switched off.
Switch cabinet cooling The cabinet cooling must be running.
Spindle guard The spindle drive can only be switched on if the spindle
guard is in the machining position.
Date: Checked by (signature):