Optimum OPTImill MZ 25, Руководство по эксплуатации

Страница: 120 / 122

GB
MZ
2S
_CE_
en.
fm
EC Declaration of Conformity
according to Machinery Directive 2006/42/EC Annex II 1.A
The manufacturer / distributor
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D96103 Hallstadt
hereby declares that the following product
Product designation:
Hand-controlled milling machine
Type designation:
MZ2S
fulfills all the relevant provisions of the directive specified above and the additionally applied directives (in
the following) - including the changes which applied at the time of the declaration.
Description:
Hand-controlled milling machine with continuously operated axles up to 2 m/min feed and / or with rapid
traverse controlled up to 5 m/min by command device with self-acting reset (jogging switch).
The following additional EU directives have been applied:
EMC Directive 2014/30/EU ; Restriction of the use of certain hazardous substances in electrical and elec-
tronic equipment 2015/863/EU
The following harmonized standards were applied:
EN 13128:2001+A2:2009/AC:2010 Safety of machine tools - Milling machines (including boring machines)
EN 60204-1:2014 - Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 13849-1:2015 - Safety of machinery - Safety related parts of controls - Part 1: General design principles
EN 13849-2:2012 - Safety of machinery - Safety related parts of controls - Part 2: Validation
EN ISO 12100:2013 - Safety of machinery - General principles for design - Risk assessment and risk
reduction
EN 61000-6-2 - Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for
industrial environments
EN 55011:2014-11 - Industrial, scientific and medical equipment - Radio-frequency disturbance characteris-
tics - Limits and methods of measurement - class A
EN 61000-3-2:2015-03 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current
emissions (equipment input current <= 16 A per phase)
EN 61000-3-3:2014-03 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage
changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated cur-
rent <= 16 A per phase and not subject to conditional connection
Name and address of the person authorized to compile the technical file:
Kilian Stürmer, phone: +49 (0) 951 96555 - 800
Kilian Stürmer (CEO, General Manager)
Hallstadt, 2019-12-11