Optimum OPTImill MZ 25, Руководство по эксплуатации

Страница: 116 / 122

Appendix
Version 1.0.4 - 2020-09-08 116 Translation of original instructions
MZ2S EN
MZ
2S
_G
B_ap
pendi
x.
fm

The following items are also not subject to liability or warranty claims:
- Wearing parts and components which are subject to normal and intended wear, such as
V-belts, ball bearings, lighting, filters, seals, etc.
- Non reproducible software errors

Any services, which OPTIMUM GmbH or one of its agents performs in order to fulfil any
additional warranty are neither an acceptance of the defects nor an acceptance of its obli-
gation to compensate. These services neither delay nor interrupt the warranty period.

The court of jurisdiction for legal disputes between businessmen is Bamberg.

If any of the aforementioned agreements is totally or partially inoperative and/or invalid, a
provision which nearest approaches the intent of the guarantor and remains within the fra-
mework of the limits of liability and warranty which are specified by this contract is deemed
agreed.
8.5 Storage
ATTENTION!
Incorrect and improper storage might result in damage or destruction of electrical and
mechanical machine components.
Store packed and unpacked parts only under the intended environmental conditions.
Follow the instructions and information on the transport box:
Consult Optimum Maschinen Germany GmbH if the milling machine and accessories are stored
for more than three months or are stored under different environmental conditions than those
specified here.

Environmental conditions - storage on page 21

Fragile goods
(Goods require careful handling)

Protect against moisture and humid environment

Prescribed position of the packing case (Marking
of the top surface - arrows pointing to the top)

Maximum stacking height
Example: not stackable - do not stack further pac-
king case on top of the first one.