OPTIMUM
M A S C H I N E N - G E R M A N Y
201
2
Technical data
Version 1.0.1 dated 30 / 08 / 2012
Page 17
Original operating instructions
MH28V
GB
2.12
Emissions
The emission of the drilling-milling machine is below 76 dB(A). If the drilling-milling machine
is installed in an area where various machines are in operation, the acoustic influence
(immission) on the operator of the drilling-milling machine may exceed 85 dB(A).
INFORMATION
This numeric value had been measured on a new machine under conventional operating
conditions. Depending on the age or wear of the machine, the noise behavior of the machine
might change.
Furthermore, the extent of the noise emission is also depending on manufacturing
influence factors, such as speed, material and clamping conditions.
INFORMATION
The mentioned numerical value is an emission level and not necessarily a safe
working level.
Unless the degree of noise emission and the degree of noise disturbance are depending on
one another it is not possible to use it in order to reliably determine if it is necessary to take
further preventive measures or not.
The following factors influence the actual degree of the noise disturbance of the
operator:
Characteristics of the working chamber, e.g. size or damping behavior
,
Other noise sources, e.g. the number of machines,
Other processes proceeding nearby and the period during which the operator is exposed
to the noise.
Furthermore, the admissible pollution level may be different from one country to another due
to the national regulations.
Width [mm]
870
Total weight [kg]
205 to 220
2.8
Work area
Height [mm]
2000
Depth [mm]
2200
Width [mm]
1500
2.9
Speeds
Reduction stage slow [min
-1
]
100 - 830
Reduction stage fast [min
-1
]
300 - 2500
2.10
Environmental conditions
Temperatur
5 - 35 °C
Luftfeuchtigkeit
25 - 80%
2.11
Operating material
Reduction stage
Blank steel parts
Mobilgrease OGL 007 or,
Mobilux EP 004, or Mobil XHP
acid-free oil, e.g. weapon oil, motor oil
