OPTIMUM
M A S C H I N E N - G E R M A N Y
201
2
Safety
Version 1.0.1 dated 30 / 08 / 2012
Page 11
Original operating instructions
MH28V
GB
there may be a risk to the drilling-milling machine and other material property,
may affect proper operation of the drilling-milling machine.
1.6
User’s position
The user must stand in front of the drilling-milling machine.
1.7
Safety measures during operation
CAUTION!
Risk due to inhaling of health hazardous dusts and mist.
Dependent on the material which need to be processed and the used auxiliaries dusts
and mist may be caused which might impair you health.
Make sure that the generated health hazardous dusts and mist are safely sucked off
at the point of origin and is dissipated or filtered from the working area. Use an
appropriate suction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Take additional preventive measures in order to safely avoid health hazards before
processing flammable materials (e.g. aluminum, magnesium) or before using
flammable additives (e.g. spirit).
1.8
Safety devices
Use the drilling-milling machine only with properly functioning safety devices.
Stop the drilling-milling machine immediately if there is a failure in the safety device or if it is
not functioning for any reason.
It is your responsibility!
If a safety device has been activated or has failed, the drilling-milling machine must only be
used when
the cause of the failure has been removed,
it has been verified that there is no danger resulting for the staff or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, your are
endangering yourself and other persons working with the drilling-milling machine.
The possible consequences are
damage as a result of components or parts of components flying off at high
speed,
contact with rotating parts,
fatal electrocution.
The drilling-milling machine includes the following safety devices:
an EMERGENCY-STOP button,
a protective cover on the drill-mill head,
a separating protective equipment on the milling spindle.
WARNING!
The separating protective equipment which is made available and delivered together
with the machine is designed to reduce the risk of workpieces or fractions of them
which being expelled, but not to remove them completely.
