OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.3.0 dated 2016-12-16
Page 9
Original operating instructions
MF2 Vario
GB
WARNING!
The milling-machine may only be used with functional safety devices. Disconnect the
milling-machine immediately, whenever you detect a failure in the safety devices or
when they are not fitted!
All additional parts of the machine which had been added by the customer need to be
equipped with the prescribed safety devices.
This is your responsibility being the operating company!
1.6
Qualification of personnel
1.6.1 Target group
This manual is addressed to
the operating companies,
operators having sufficient specialist knowledge,
the maintenance personnel.
Therefore, the warning notes refer to both, operation and maintenance personnel of the milling-
machine.
Determine clearly and explicitly who will be responsible for the different activities on the milling-
machine (operation, setting up, maintenance and repair). Please note the name of the responsi-
ble person into an operators´s log.
INFORMATION
Unclear responsibilities constitute a safety risk!
Always lock the main switch after switching off the milling-machine. This will prevent it from
being used by unauthorized personnel.
The qualifications of the personnel for the different tasks are mentioned below:
Operator
The operator is instructed by the operating company about the assigned tasks and possible
risks in case of improper behaviour. Any tasks which need to be performed beyond the opera-
tion in the standard mode must only be performed by the operator if it is indicated in these
instructions and if the operating company expressively commissioned the operator.
Electrical specialist
Due to his professional training, knowledge and experience as well as his knowledge of respec-
tive standards and regulations the electrical specialist is able to perform works on the electrical
system and to recognise and avoid any possible dangers himself.
The electrical specialist is specially trained for the working environment in which he is working
and knows the relevant standards and regulations.
Qualified personnel
Due to their professional training, knowledge and experience as well as their knowledge of rele-
vant regulations the qualified personnel is able to perform the assigned tasks and to recognise
and avoid any possible dangers themselves.
Instructed person
Instructed personnel were instructed by the operating company about the assigned tasks and
any possible risks in case of improper behaviour.
