OPTIMUM
M A S C H I N E N - G E R M A N Y
Operation
Version 1.1.5 dated 2015-08-31
Page 26
Original operating instructions
BF30Vario
GB
4
Operation
4.1
Safety
Commission the drilling-milling machine only under the following conditions:
The drilling-milling machine is in proper working order.
The drilling-milling machine is used as intended.
The operating manual is followed.
All safety devices are installed and activated.
All failures should be eliminated immediately. Stop the drilling-milling machine immediately in
the event of any abnormality in operation and make sure it cannot be started up accidentally or
without authorisation.
"For your own safety during operation“ on page 15
4.2
Control and indicating elements
Pos.
Designation
Pos.
Designation
1
Cover of draw-in rod
2
Control panel
3
Digital display fine crossfeed of spindle sleeve
4
Spindle protection
5
Crank for height adjustment of the drill-mill head
6
Selector switch for reduction stage
7
Star grip for spindle sleeve feed
8
Activation of the fine adjustment
9
Fine adjustment of spindle sleeve
10
Clamping lever for spindle sleeve
1
3
4
5
6
7
6
9
10
8
2
