Optimum Optimill BF 30V, Руководство по эксплуатации

Страница: 12 / 70

OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.1.5 dated 2015-08-31 Page 12 Original operating instructions
BF30Vario GB
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Before processing inflammable materials (e.g. aluminium, magnesium) or using
inflammable auxiliary materials (e.g. spirit) it is necessary to take additional preventive
measures in order to safely avoid health risks.
1.9 Safety devices
Use the drilling-milling machine only with properly functioning safety devices.
Stop the drilling-milling machine immediately if there is a failure on the safety device or if it is
not functioning for any reason.
It is your responsibility!
If a safety device has been activated or has failed, the drilling-milling machine must only be
used if you

have removed the cause of the failure,

have verified that there is no danger resulting for the staff or objects.
WARNING!
If you bypass, remove or deactivate a safety device in any other way, you are
endangering yourself and other staff working with the drilling-milling machine. The
possible consequences are

injuries due to components or parts of components flying off at high speed,

contact with rotating parts,

fatal electrocution.
The drilling-milling machine includes the following safety devices:

an EMERGENY-STOP button,

a protective cover on the drilling / milling head.

a separating protective device on the milling spindle,
WARNING!
The separating protective equipment which is made available and delivered together
with the machine is designed to reduce the risk of workpieces or fractions of them which
being expelled, but not to remove them completely. Always work carefully and observe
the limit values of your chipping process.
1.9.1 EMERGENCY STOP switch
The EMERGENCY STOP push button switches
off the drilling-milling machine.

"Switching on the drilling-milling machine“
on page 28
Img.1-2: EMERGENCY STOP switch
ATTENTION!
The emergency stop push button stops the drilling-milling machine the moment it is
activated.
Emergency stop