Optimum OPTidrill RD 4, Руководство по эксплуатации

Страница: 10 / 80

OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.0 dated 2017-03-13 Page 10 Original operating instructions
RD4 GB
R
D
4_
GB
_1.
fm

at high speeds,

with rotating parts,

electrical voltage and currents.
We have used design and safety engineering to minimize the health risk to personnel resulting
from these hazards.
If the radial drilling machine is used and maintained by personnel who are not duly qualified,
there may be a risk resulting from incorrect or unsuitable maintenance of the radial drilling
machine.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must

be duly qualified,

and strictly follow these operating instructions.
In the event of improper use

there may be a risk to personnel,

there may be a risk to the machine and other material values,

the correct function of the radial drilling machine may be affected.
Always disconnect the radial drilling machine if cleaning or maintenance work is being carried
out, or is no longer in use.
WARNING!
The radial drilling machine may only be used with functional safety devices.
Disconnect the radial drilling machine immediately, whenever you detect a failure in the
safety devices or when they are not fitted!
All additional devices installed by the operator must be equipped with the stipulated
safety devices.
This is your responsibility as the operator!

"Safety devices“ on page 12
1.6 Qualification of personnel
1.6.1 Target group
This manual is addressed to

the operating companies,

the operators,

the maintenance personnel.
Therefore, the warning notes refer to both, operation and maintenance personnel of the radial
drilling machine.
Determine clearly and explicitly who will be responsible for the different activities on the geared
drill (operation, setting up, maintenance and repair).
Unclear responsibilities constitute a safety risk!
Always disconnect the main plug of the machine and secure the main switch using a lock. This
will prevent it from being used by unauthorized persons.
The qualifications of the personnel for the different tasks are mentioned below:
Operator
The operator is instructed by the operating company about the assigned tasks and possible
risks in case of improper behaviour. The operator may only carry out tasks that exceed normal
operation if this is stated in these instructions and the operating company has explicitly
entrusted him with the task.