OPTIMUM
M A S C H I N E N - G E R M A N Y
Assembly
Version 2.0.2 2014-11-04
Page 24
Original operating instructions
B17Pro | B23Pro | B26Pro | B33Pro
GB
Any parts sticking out such as stops, handles, etc. have to be secured by measures taken
by the customer if necessary in order to avoid endangerment of persons.
Provide sufficient space for the staff preparing and operating the machine and transporting
the material.
Also consider that the machine is accessible for setting and maintenance works.
Provide for sufficient illumination (Minimum value: 500 lux, measured at the tool tip). At little
intensity of illumination an additional illumination has to be ensured e.g. by means of a sep-
arate workplace lamp.
INFORMATION
The mains plug of the drilling machine has to be freely accessible.
3.4.2 Assembly
WARNING!
Danger of crushing when assembling and installing the machine components.
"Qualification of the staff“ on page 11
The drilling machine must be installed by at least 2 people, because various elements
and individual parts have to be sustained and joined during assembly.
INFORMATION
The following description of the assembly refers to the B26Pro drilling machine. It has been
chosen for description of the following operations because of its close similarity with the drilling
machines.
B17Pro
B23Pro
B33Pro
Mounting of base and drill column
Position the base on the floor and
attach the column to the base. Fasten-
ing screws for the drilling pillar have
been provided on the base.
Loosen the screw on the retaining ring
and remove the retaining ring and
toothed rack.
Img.3-1:
Assembly of the base
Screw
Retaining ring
Toothed rack
Drill column
Base
