OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 2.0.2 2014-11-04
Page 18
Original operating instructions
B17Pro | B23Pro | B26Pro | B33Pro
GB
1.16.3 Mechanical maintenance work
Remove or install protection safety devices before starting any maintenance work and re-install
them once the work has been completed.This includes:
Covers,
Safety indications and warning signs,
Earth (ground) connections.
If you remove protective or safety devices, re-fit them immediately after the completing the
work.
Check if they are working properly!
1.17
Accident report
Inform your superiors and Optimum Maschinen Germany GmbH immediately in the event of
accidents, possible sources of danger and any actions which almost led to an accident (near
misses).
There are many possible causes for "near misses".
The sooner they are notified, the faster the causes can be eliminated.
INFORMATION
We point out the specific dangers when performing works with and on the drilling machine
when describing such works.
1.18
Electrical system
Have the machine and/or the electric equipment checked regularly. Check the electrical sys-
tem according to DIN EN 60204.
Immediately eliminate all defects such as loose connections, defective wires, etc.
A second person must be present during work on live components to disconnect the power in
the event of an emergency.
Immediately disconnect the drilling machine if there are any anomalies in the power supply!
