OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 2.0.2 2014-11-04
Page 15
Original operating instructions
B17Pro | B23Pro | B26Pro | B33Pro
GB
1.11
Drilling table
Seats for T-slots are attached to the drill-
ing table.
WARNING!
Risk of injury due to parts flying off at
high speed. Securely fix the workpiece
on the drilling table.
Img.1-4:
Drilling table
1.12
Prohibition, warning and mandatory signs
INFORMATION
All warning signs must be legible. Check them regularly.
1.13
Safety check
Check the drilling machine at least once per shift. Inform the person responsible immediately of
any damage, defect or change in operating function.
Check all safety devices
at the beginning of each shift (at continuous operation),
once a week (with the machine in operation),
after every maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the driling machine.
are legible (clean them, if necessary),
are complete.
INFORMATION
Use the following table for organizing the checks.
Seats for clamping
blocks
General check
Equipment
Check
OK
Protective cover
Mounted and securely tightened
Signs,
Markings
Installed and legible
Date:
Checked by (signature):
Functional test
Equipment
Check
OK
EMERGENCY-STOP
Push button
After actuating an EMERGENCY STOP push button the drilling machine
must be switched off.
Drill chuck protection
Once the emergency stop button is activated, the bench drilling machine
should be switched off. The drilling machine may not start if the drill
chuck protection is open.
Date:
Checked by (signature):
