Optimum Froothie Evolve FE9600, Руководство пользователя, Страница: 14 / 16

12
HELP! SOMETHING HAS GONE WRONG
PROBLEM SOLUTION
It’s not working!
Check that the machine is plugged in to the wall and the power
point is on. make sure to place the jug properly on the base.
My blender stopped
working half way through
blending...
Your blender may have overheated, when blending thick
contents (dates, making nut butter) the machine must be used
on the highest setting FAST, basically blend on low speed for few
seconds and then go on high speed. Allow the machine to cool for
30-45 minutes before turning back on.
The jug contents are
stuck to the side and not
blending!
tamper tool supplied with your blender. Move the tamper at an
liquid can also assist with a better blend. You can also use the
tamper while you are blending to push the contents into the
During blending, the
contents do not appear to
be moving!
The jug may be over-loaded or may have trapped an air
bubble. You can carefully remove the lid plug (insert) and use
the tamper tool. If the food still does not circulate, try adding
more liquid or reducing the quantity in the jug.
My blender is emitting a
strong electrical smell.
For the first few uses there is always a slight burning smell with
all high speed blenders, this is from the lubricants used in the
the electrical ozone (strong smell) will subside, this is from the
windings on the motor curing.
That smell has come
ERROR CODES
E1 OR E5
When the blender is under high load (thick/very thick contents)
CONTACT FROOTHIE SUPPORT.
E2
The lid or inner lid is not inserted properly and jug is not
closed properly.
E10
Jug base overheated, please stop blending or cooking and
wait for few minutes.
E19
The temperature inside of the jug exceeded 80 degrees,
please stop and allow the ingredients to cool down.
or used for a long period (making soups) the smell may return.
This is due to heat saturation of the motor but will also reduce
over time. This is typical with all high speed blenders and
nothing to be concerned about.