DR01 - EN
Version 1 - 2020-04-09
13
Translation of original instruction
DRO1
EN
OP_B
A_DRO
1_GB
.f
m
1.16
Disable and enable parameters / keys
Function description: You can disable keys or parameters to prevent incorrect operation dur-
ing use. The steps are as follows:
Step 1. Hold down the button
,
until the DR01
displays the parameter symbol
.
Step 2. Press
until SYS is displayed.
Step 3. Press
, (number flashes)
Step 4. Enter the password 2201: press the
button, set the value, press the
button, move
the digit.
Step 5. Please confirm the password on the screen,
press
to enter the parameter.
Step 6. Press
to set on / off.
Step 7. Press the button
to select the
parameter.
Step 8. After the parameter / button is on or off. Press
or
, and select End SYS.
Step 9. Press the button
, SYS will be
displayed indicating that the setting is complete.
without
function
mm / inch button
ABS / REL button
CLR / SET button
on
off