DR01 - EN
Version 1 - 2020-04-09
7
Translation of original instruction
DRO1
EN
OP_B
A_DRO
1_GB
.f
m
1.10
Setting the counting direction
Function description: Changing the current counting direction.
For example: The DR01 currently displays 100.00mm. As the read head moves to the right, the
value decreases (for example, to 99.68mm). If you want to increase the value, you must com-
plete the following steps
Modification:
Step 1. Press and hold the
button. The icon
is displayed in the upper right corner of the
screen. After about 5 seconds you will be forwarded to
the parameter setting.
Note: Press
or
to display various
parameters.
Step 2. Press
"dir" is displayed. (Select ±
direction parameter)
Step 3. Press
to display the current
setting direction, then press
or
to
change the current setting direction.
Step 4. Press
to complete the setting.
Step 5. Press
to exit the parameter setting
screen.
Note: After setting, if you want to change the original
value, please read "Current value calibration" and set it
again.