Optimum B50 GSM, Руководство по эксплуатации

Страница: 13 / 70


201
4
US
Page 13 22 / 07 / 2014 Version 1.0.3 B50 GSM Geared drill
OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
1.9 Personnel protective equipment
For certain work personnel protective equipment is required. This includes:

a safety helmet,

safety glasses or face guard,

protective gloves,

safety shoes with steel toe cap,

ear protection.
Before starting work check that the proper equipment is available in the workplace.
CAUTION!
Dirty or contaminated personnel protective equipment can cause disease.
Clean your personnel protective equipment
•
after every use,
• regularly, at least once a week.
Personnel protective equipment for special work
Protect your face and eyes: During all work, and specifically work during which your face and
eyes are exposed to hazard, a safety helmet with a face guard should be worn.
Use protective gloves when lifting or handling pieces with sharp edges.
Wear safety shoes when you position, dismantle or transport heavy components.
General check
Equipment Check OK
Protective covers
Mounted, firmly bolted and not damaged
Drill chuck guard
Labels, markings Installed and legible
Date: Checked by (signature):
Test run
Equipment Check OK
EMERGENCY stop
button Once the emergency stop button is activated, the geared
drill should be switched off.
Drill chuck guard The geared drill can only be switched on as soon as the
drill chuck guard has been closed.
Date: Checked by (signature):