Version 1.0.5 - 2021-01-29
92
Translation of original instruction
MH50G
│
MH50V
EN
M
H
50
G
_M
H
50
V
_
GB
_
4.
fm
4.13
Inserting or Removing Tool
Unlock or lock the mechanical securing ( 21
) of the quick clamping system.
Img.4-4:
Mechanical securing, quick clamping system
4.13.1 Inserting
The milling head is equipped with a collet chuck for
BT40x45° pull studs.
Screw pull studs into the conical seat.
Clean seat in the milling spindle.
Clean cone of the tool.
Mechanical securing of the quick clamping system
( 21 ) to be released.
Push up the spindle level and place the tool into the
spindle.
Release the spindle lever again.
Mechanical securing of the quick clamping system
( 21 ) to be locked.
Img.4-5:
Pull stud
4.13.2 Removing
Release mechanical securing of the quick
clamping system ( 21 ).
Firmly hold the tool.
Push up the spindle lever.
Img.4-6:
Unfitting
4.14
Clamping the workpieces
CAUTION!
Injuries can be caused by parts flying off.
21
15
10
60
35
M16
45°
21