Optimum 333 8160, Руководство по эксплуатации

Страница: 12 / 72

Version 1.0.4 - 2020-12-15 12 Translation of original operating manual
MH25SV EN
MH
25
SV
_GB_
1.
fm
system and recognise and avoid any possible dangers. Qualified electricians have been spe-
cially trained for the working environment, in which they are working and know the relevant
standards and regulations.
Qualified personnel
Due to their professional training, knowledge and experience as well as knowledge of relevant
regulations, qualified personnel are able to perform the assigned tasks and to independently
recognise and avoid any possible dangers.
Trained person
Trained persons have been instructed by the operating company regarding the assigned tasks
and any possible risks of improper behaviour.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must

be duly qualified,

and strictly follow these operating instructions.
In the event of improper use

there may be a risk to personnel,

there may be a risk to the milling machine and other material values,

the correct function of the milling machine may be affected.
1.6.2 Authorized personnel
WARNING!
Inappropriate operation and maintenance of the machine constitutes a danger for the
personnel, objects and the environment.
Only authorized personnel may operate the machine!
Persons authorized to operate and maintain the machine should be technical personnel,
instructed and familiarized with the equipment by the operating company and the manufacturer.
1.6.3 Obligations of the operating company
The operator must instruct the personnel at least once a year regarding

all safety standards that apply to the machine,

the operation,

generally accepted engineering standards.
The operating company must also

check the personnel‘s knowledge level,

document the training/instruction,

require personnel to confirm participation in training/instruction by means of a signature,

check whether the personnel is working in a safe and risk-conscious manner and following
the operating instructions.

define and document the inspection deadlines for the machine in accordance with § 3 of the
Factory Safety Act and perform an operational risk analysis in accordance with § 6 of the
Work Safety Act.
1.6.4 Obligations of the operator
The operator must

have read and understood the operating manual,

be familiar with all safety devices and regulations,

be able to operate the machine.