Safety
Version 1.1.2 - 2022-02-24
52
Translation of original instruction
S 131 GH
EN
S131
GH_GB
_1.
fm
1.6
Qualification
1.6.1
Target group private users
The machine can be used in the private domain. The acumen of people in the private sector
with training in metal working was taken into consideration for creating this operation manual.
Vocational training or further instruction in a metal working profession is a prerequisite for safe
operation of the machine. It is essential that the private user is aware of the dangers involved in
operating this machine. We recommend visiting a training course in the operation of metal band
saws. Your specialist dealer can offer you an appropriate training course. These courses are
also offered by adult education centres in Germany.
1.6.2
Obligations of the User
The user must
have read and understood the operating manual,
be familiar with all safety devices and regulations,
be able to operate the metal band saw.
1.6.3
Additional requirements regarding the qualification
Additional requirements apply for work on electrical components or equipment:
Must only be performed by a qualified electrician or person working under the instructions
and supervision of a qualified electrician.
Before starting work on electrical parts or operating agents, following measures are to be
performed in the following order:
disconnect all poles,
secure against restarting,
Ensure that there is no voltage.
1.7
Operator positions
The operator must stand beside the metal band saw.
INFORMATION
The mains plug of the metal band saw must be freely
accessible.
Img.1-1:
Operator positions
1.8
Safety devices
Use the metal band saw only with properly functioning safety devices.
Stop the drilling machine immediately if there is a failure on the safety device or if it is not
functioning for any reason.
It is your responsibility!
If a safety device has been activated or has failed, the metal band saw must only be used if you
the cause of the fault has been eliminated,