Optimum 3111025 Скачать руководство пользователя страница 43

Страница: 43 / 168

Operation

Version 1.0.2 - 2020-09-15

Translation of original instructions

GT25 | GT30 | GT40

GT25_G

T30_G

T40_G

B_4.

4.7

Setting up the oscillating path and the traverse path in the transverse axis

4.7.1

Transverse axis - Z axis



Position the trip cams (1) according to the
desired travel range.

Abb.4-1:

Trip cams transverse axis

4.7.2

Oscillation, longitudinal axis - X axis

Position the trip cams (1) according to the
desired oscillation range.

Speed see:



Grinding table oscillation on

page 42

Abb.4-2:

Trip cams longitudinal axis

4.8

Manual surface grinding

For manual surface grinding, the grinding wheel is infeeded by means of the electronic
handwheel or in Jog mode with pushbuttons after each pass in the transverse axis.



Push buttons for grinding head up and down in Jog mode on page 42

INFORMATION

The grinding wheel can only be started when the grinding wheel cover is closed.

X Longitudinal grinding surface (oscillating path)

erse

xis

Infeed

Grin

ding

eel

Содержание 3111025









































































































































































Результаты поиска

Содержание 3111025

Отзывы:

Optimum 3111025, Руководство по эксплуатации, Страница: 43 / 168

Результаты поиска

Содержание 3111025

Отзывы: