Maintenance
Version 1.0.1 - 2020-11-12
11
Translation of original instruction
GU35P
EN
GU35P
_GB
.f
m
4.1
Resetting the motor circuit breaker
When the motor has been overloaded.
Activate the motor circuit breaker again. Press the reset button.
INFORMATION
Make sure that the polishing forces are not too large. The motor protection switch
triggers before the three-phase motor stops due to overload.
5
Maintenance
In this chapter you will find important information about
Inspection
Maintenance
Repair
of the polishing machine.
ATTENTION!
Properly performed regular maintenance is an essential prerequisite for
operational safety,
failure-free operation,
a long working life of the polishing machine and
the quality of the products which you manufacture.
Installations and equipment from other manufacturers must also be in good order and condition.
5.1
Safety
WARNING!
The consequences of incorrect maintenance and repair work may include:
extremely serious injuries to those working on the polishing machine and
damage to the polishing machine.
Maintenance and repair work on the polishing machine must be carried out by qualified
technical personnel only.
5.1.1
Preparation
WARNING!
Only work on the polishing machine if it has been disconnected from the power supply.
Reset button
