Operation DPA31
Version 1.0 - 2020-12-10
50
Translation of original instructions
DPA31
EN
D
P
A
3
1_
G
B
_3
.f
m
5.6.4 Arc
Creates an arc in a coordinate system such that processes can be carried out on said arc.
The parameters are displayed in the Rotation Speed field.
The last value entered for each parameter is displayed in the X axis row.
Enter new values in the Y axis row.
Entering the Parameters
Parameters
Description
1 - 1 ACE
Midpoint of the arc on the coordinate plane: X-Y
2 - 1 ACE
Midpoint of the arc on the coordinate plane: Y-Z
3 - 1 ACE
Midpoint of the arc on the coordinate plane: X-Z
To select X-Y, Y-Z or X-Z as the coordinate plane, press the
key.
To enter the end midpoint of the arc, use the numeric keys
and confirm with the
key.
Parameters
Description
1 - 2 5E_d
Radius of the arc on the coordinate plane: X-Y
2 - 2 5E_d
Radius of the arc on the coordinate plane: Y-Z
3 - 2 5E_d
Radius of the arc on the coordinate plane: X-Z
To enter the end radius of the arc, use the numeric keys
and confirm with the
key.
