Operation DPA31
Version 1.0 - 2020-12-10
46
Translation of original instructions
DPA31
EN
D
P
A
3
1_
G
B
_3
.f
m
Positioning the Coordinate Points
INFORMATION
Press the button
to temporarily interrupt the function. The display returns to the normal
display status. Press the 0 key again to continue with the function.
To exit from the function, press the
button.
5.6.2
Coordinate Points on a Circle or Arc
Creates a circle or arc within a coordinate system, along which a specified number of uniformly
spaced coordinate points are defined.
The set coordinate points on the circle or arc run counter clockwise. Coordinate point 2 is
located counter clockwise of coordinate point 1.
The parameters are displayed in the Rotation Speed field.
The last value entered for each parameter is displayed in the X axis row.
Enter new values in the Y axis row.
Parameters
Description
1LHo
Coordinate point no.: X-Y
2LHo
Coordinate point no.: Y-Z
3LHo
Coordinate point no.: X-Z
To select the desired coordinate point, press the
button.
To select the previous coordinate point, press the
button.
Then move the machine axes until the positions of the selected coordinate point show 0.000.
