Version 1.0.1 - 2020-04-09
14
Montageanleitung
GU 5 | GU 5-H
EN
GU5_G
U5-H_G
B_5.
fm
5
Maintenance
5.1
Inspection and maintenance
The type and level of wear depends to a large extent on the individual usage and operating
conditions. Any indicated intervals therefore are only valid for the corresponding approved
conditions.
Maintenance work must be carried out in a room with filtered forced ventilation.
6
Malfunctions
Interval
Where?
What?
How?
Start of work,
after every main-
tenance or repair
work
after empirical
values on the
part of the opera-
tor
Co
llectio
n tan
k
Emptying
Empty the collection tank regularly.
If the suction per-
formance redu-
ces.
after empirical
values on the
part of the opera-
tor
Ex
ha
us
t ai
r
Cleaning
Replacing
Wash the exhaust air filter with water, dry and reinsert.
If necessary, replace the exhaust air filter.
after empirical
values on the
part of the opera-
tor
C
y
cl
on
e se
p
a
ra
tor
Check
Cleaning
Checks should be carried out at regular intervals if par-
ticles have deposited inside the device, e.g. in the cyclone
separator. These must be removed.
Annually
A
m
bien
t air
Hazardous
substances
exposure
Local measurements for particulate hazardous
substances.
every 3 years
Local measurements for pure gaseous substances.
Malfunction
Cause/
possible effects
Solution
Do not switch on the
blower fans.
•
Incorrect socket used.
•
Neutral conductor N not present
•
Use a 5-pin 3-phase current - Use an
extension cable.
•
400 V power supply cable not executed
as 5-pin.
