DFB-
B Benchtop User’s Manual
Page 12 of 12
Optilab, LLC
600 E. Camelback Road, Phoenix, AZ 85012
Phone: (602) 343-1496, Fax: (602) 343-1489, Email: [email protected]
5.
DFB-4-B Command Set
5.1.
Serial Port Connection Details
•
Baud Rate: 9600
•
Data Bits: 8
•
Stop Bits: 1
•
Parity: None
•
Flow Control: None
5.2.
Query Commands
READ
{CR/LF}
– Read the device information (see format below)
HELP
{CR/LF}
– Read the device command set
5.3.
Set Commands
SET[ADD]C:XXX
{CR/LF}
– Set the laser drive current in mA; 3 digits required.
e.g. SET2C:075
{CR/LF}
–
Sets the drive current of channel 2 to 75mA.
SET[ADD]T:XX.X
{CR/LF}
– Set the TEC temperature in C; First 2 digits required.
e.g. SET3T:28.2
{CR/LF}
–
Sets the TEC temperature of channel 3 to 28.2°C.
