Optika Italy C-B Series, Инструкция по эксплуатации

Страница: 15 / 102

Page 15
9. Use of camera
For biological microscopes calibration
1 DIV=0.01mm
The camera is driven by a software.
Two levels of software are available: PROVIEW and LITEVIEW.
Inside the package is enclosed a Function Table showing the several software functions.
It will be the user’s responsibility to decide which level of software best meets his needs.
The software can be downloaded from the site:
http://www.optikamicroscopes.com/optikamicroscopes/optika-support/download-drivers-softwares/
You will have to register to download the .zip file.
Once the file has been downloaded, you will have to run the setup.exe file.
At the end of the installation it is possible to start the software.
• NOTE: no driver installation is required for the cameras. The software setup procedure automatically installs
all the needed drivers for the correct operation of the camera .
The software’s User Manual is available in PDF format within the application itself and can be opened using the “F1” func -
tion key.
You must have Acrobat Reader installed to view the manual.
The manual contains all the operating instructions for using the camera and for the various functions of the software.
For stereo microscopes calibration
1 DIV=0.1mm
0 1 2 3 4 5 6 7 8 9 10
10. Micrometric Slide M-005
Micrometric slide, 26x76mm, with 2 scales
(1mm/100div. for biological microscopes / 10mm/100div. for stereomicroscopes)