Joystick Web Interface
Device Management
The Device Management page, available from the controllers web interface, allows you to define new cameras
and adjust already configured cameras.
Group 1-4:
Camera groups 1 - 4. Each group includes 7 channels / cameras.
Channel:
Joystick control address.
Options include: 1 - 7 (IP & Serial)
IP:
The IP address of the saved network camera.
Port:
The control port of the saved network camera.
Type (Network):
The control protocol of the saved network camera.
Baudrate:
The baud rate of the saved serial camera.
Address:
The camera control address of the saved serial camera.
Type (Serial):
The control protocol of the saved serial camera.
Operate:
Click “modify” to edit the settings of the saved camera. Use “snap” to take a snapshot of the
camera’s current view. “Home” will allow you to send the camera to the home position.
For more information on editing already configured cameras from the Device Management interface,
check out the Adding a Camera >
Control
The Control page, available from the controllers web interface, allows you to call presets of the connected
cameras. This page acts similarly to
Matrix Mode
The Matrix Mode page, available from the controllers web interface, allows you to call presets 1-3 of cameras
1-3. This page acts similarly to
20
Rev 1.2 2/21
