41
3.
Installation
3.1
Dish Setting
Select the satellite/antenna and LNB settings for service sear
ch. The values that are set in this menu will be available f
or selection in other service searching menus.
Satellite :
Select the satellite which you want to do a search
for.
-
Press the
LEFT/RIGHT ARROW
button to select the
satellite.
-
If you press the
OK
button, the entire satellite list will be
displayed.
-
Select the desired satellite name to search.
-
If the desired satellite name is not listed then select User Defined.
Frequency :
Select the satellite frequency which you want to use for checking the signal.
LNB Power :
Select the LNB power on or off.
LNB Type :
Select the LNB type.
LNB Frequency :
Select the local oscillator (L.O.). frequency that is specified for the LNB used..
-
Use the
LEFT/RIGHT ARROW
buttons to select the LNB frequency.
-
If the required LNB frequency is not listed, then enter the frequency manually using the
NUMERIC
buttons.
-
When you select Universal LNB type, both 9750 and 10600 are supported at the same time. And
then the LNB 22KHz setting is disabled.
LNB 22KHz :
When you use a separate coax 22 KHz tone switch box, make the 22 KHz tone switch
enabled or disabled to select the input you desire of the tone switch.
DiSEqC Switch :
If you use
DiSEqC 1.0
or
DiSEqC 1.1
switch, select one of the DiSEqC inputs.
Service Search :
Press the
OK
button to move to the Search Menu
3.2
Positioner Setting
Satellite :
Select the satellite which you want to search for the
Service.
-
Press the
LEFT/RIGHT ARROW
button to select the satellite.
-
If you press the
OK
button, a complete satellite list will be
displayed.
-
Select the wanted satellite name.
-
If the desired satellite name is not listed then select User
Defined.
Frequency :
Select the satellite frequency you want to use to
check for a signal.
Positioner :
Select the positioner.
-
None : (No Positioner)
-
Using DiSEqC 1.2 :
Move :
To move the dish, press
LEFT/RIGHT
button.
Fine Move :
To move the dish in smaller steps, press the
LEFT/RIGHT ARROW
button.
Step :
Set to positioner moving steps as 1, 2, 3, 4
Positioner Command :
To use various positioner
commands, press the
OK
button. Then, available positioner
commands will appear.
Содержание Anaconda HD
