Maintenance
Setting
28
10
Maintenance Setting
Measurement value hold
The latest measurement value is retained (held). This is used for sensor
maintenance and cleaning.
Set the maintenance setting from SC-U1.
To perform maintenance, press
.
Hold timer
Set the time period to hold the measurement value.
Select an item from the following.
Output item
Setting range
Factory default
setting
HOLD Timer
OFF
10 to 1440 minutes (by 10 minutes)
60 minutes
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "8 Maintenance Setting" and "
◆
Measurement value hold".
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "8 Maintenance Setting" and "
◆
Hold Timer".
Caution
Pressing
automatically retains the measurement value.
